Blanking plug for the PCV location on the inlet manifold. This will be used when a catch tank has been fitted and the PCV removed.
Tumbler Generator Valves (or "TGV" as they are most commonly referred to) can be found on Impreza WRX, Forester Turbo and Legacy GT models from 2001 onward.
Their prime purpose is to reduce emissions from cold idle to meet standards governed by the...
Tumbler Generator Valves (or "TGV" as they are most commonly referred to) can be found on Impreza WRX, Forester Turbo and Legacy GT models from 2001 onward.
Their prime purpose is to reduce emissions from cold idle to meet standards governed by...
The RCM drive by wire electric throttle body has been designed and engineered specifically for Subaru applications, for vehicles using a reversed inlet manifold configuration.
Manufactured from machined billet aluminum housings, it is fully assembled and ready to bolt directly to your reversed manifold,...
The RCM Thermal Gasket kit contains everything required to install our Phenolic Spacers to your Impreza. The kit is designed to aid in the reduction of the inlet air temperature, by isolating the inlet manifold from the heat generated by...
The RCM Thermal Gasket kit contains everything required to install our Phenolic Spacers to your Impreza. The kit is designed to aid in the reduction of the inlet air temperature, by isolating the inlet manifold from the heat generated by...
The RCM Thermal Gasket kit contains everything required to install our Phenolic Spacers to your Impreza. The kit is designed to aid in the reduction of the inlet air temperature, by isolating the inlet manifold from the heat generated by...
The RCM Thermal Gasket kit contains everything required to install our Phenolic Spacers to your Impreza. The kit is designed to aid in the reduction of the inlet air temperature, by isolating the inlet manifold from the heat generated by...
One of the most prominent parts in any Subaru engine bay is the inlet manifild. All too often this large part is overlooked, which can detract from even the most detailed of vehicles.
Offered on an exchange basis, the RCM refurbishing...
Tumbler Generator Valves (or "TGV" as they are most commonly referred to) can be found on Impreza WRX, Forester Turbo and Legacy GT models from 2001 onward.
Their prime purpose is to reduce emissions from cold idle to meet standards governed by the...
Tumbler Generator Valves (or "TGV" as they are most commonly referred to) can be found on Impreza WRX, Forester Turbo and Legacy GT models from 2001 onward.
Their prime purpose is to reduce emissions from cold idle to meet standards governed by the...
The RCM Alternator reverse kit has been designed to allow the alternator position to be changed, allowing clearance for a rotated inlet manifold.
The Process West range billet manifolds is a no holds barred manifestation of what is possible under the hood of a WRX/STI when perfect aesthetics meet high end performance. What you see here is the result of years of research...
The RCM throttle wedge is a part which can greatly aid in reducing cost and time when installign a reverse facing manifold. Designed to be used on V7+ Manifolds, the wedge is designed to be welded directly onto your manifold, and...
Inlet Manifold Gasket for all Impreza's 08/1998 on.
Inlet Manifold gasket for all Impreza's from 1992 - 08/1998
Idle Stabilizer Gasket V1 - V4
Manifold to TGV Gasket
This gasket is located between the inlet manifold and the tumbler generators.
Genuine Subaru Throttle Body Gasket, to fit V5 - V6 Impreza.
Genuine Subaru Throttle Body Gasket, to fit V1 - V4 Impreza.
